Products
Contact Us
- Contact Person : Mr. Liu Andy
- Company Name : Leetro Automation Co., Ltd.
- Tel : 86-28-85142599
- Fax : 86-28-85187774
- Address : Sichuan,Chengdu,Bldg. 8-B, Dayi Incubation Park, No. 1, Keyuan South 2nd Road, New and Hi-Tech Zone
- Country/Region : China
- Zip : 610041
Products List
DM86xxE, 2-phase Hybrid Stepper/stepping Motor
* flange size: 86x86mm
* higher holding torque, 3.4 - 8.7Nm
ItemSpecificationsStep Angle1.8°Step Angle Accuracy±5% (full step, no load)Resistance Accuracy±10%Inductance Accuracy±20%Temperature Rise80CMax. (rated current, 2 phase on)Ambient...
1.2 three-phase Hybrid Stepper Motor (DM39xxE)
* flange size: 85x85mm;
* high holding torque, 2 - 6Nm.
ItemSpecificationsStep Angle1.2°Step Angle Accuracy±5% (full step, no load)Resistance Accuracy±10%Inductance Accuracy±20%Temperature Rise80C Max. (rated current, 2 phase on)Ambient...
4-axis Universal/general-purpose Motion Controller
* 4-axis with output frequency up to 2 MHz;
* 2-4 axes linear & 2-axis circular interpolation;
* Programmable T/S-profile.
* PCI-BUS * 1 to 4-axis card for stepper motors or digital servo motors * Pulse frequency from 0.02Hz to max 2MHz* Linear interpolation for multiple...
2-phase Hybrid Stepper Motor, DM2xxE
* 2-phase Hybrid Stepping Motor;
* flange Size: 20.2mm;
* Higher Holding Torque, 0.018 - 0.03Nm
...
3-axis High Performance Laser Motion Controller (MPC6535)
* 3-axis control with pulse frequency up to 7.5MHz
* USB and RS232 interfaces
* Uncapping protection
* Flying-optics
* Stand-Alone motion controller* Pulse frequency up to 7.5M Hz* 3-axis card for stepper motors or digital servo motors* RS232 applicable for mainstream...
100W Single Output Switching Power Supply (NES-100-24)
* Protections: Short circuit/Over load/Over voltage;
* Cooling by free air convection;
* LED indicator for power on/off.
Output SETUP, RISE TIME 500ms, 20ms/230VAC 500ms, 20ms/115VAC at full loadOutput HOLD TIME...
MPC6610, CNC Router Motion Controller
MPC6610 is designed for the open-loop motion control system which is in the CNC routing machine exclusively.
MPC6610 is designed for the open-loop motion control system which is in the CNC routing machine only. Based on DSP and FPGA technology, the advanced velocity...
3-axis Motion Controller (MPC6515)
* 3-axis control with pulse frequency up to 2MHz;
* General controller for open-loop laser control system.
* Stand-Alone Motion Controller* Apply DSP and FPGA technologies* 3-axis card for stepper motors or digital servo motors * Trapezoidal or S-curve drive of slow-up/slow down...
DC Linear Power Supply
* Supports 1-4 axes power supply, more cost-effective;
* With Accessory Power Supply (+5 or +12VDC);
* with replaceable fuse.
1. Features- Simple Structure, more...
DMD403A, 2-phase Hybrid Stepper Motor Drive
* 2-phase;
* Supply voltage to +40VDC, current to 3.5A;
* Microstep resolutions up to 51200 steps/rev;
* for 4, 6, or 8-lead.
Cost EffectiveSupply voltage to +40VDC, current to 3.5AInaudible 20khz chopping frequencyTTL compatible and optically isolated input signalsAutomatic...