Products
Contact Us
- Contact Person : Mr. Liu Andy
- Company Name : Leetro Automation Co., Ltd.
- Tel : 86-28-85142599
- Fax : 86-28-85187774
- Address : Sichuan,Chengdu,Bldg. 8-B, Dayi Incubation Park, No. 1, Keyuan South 2nd Road, New and Hi-Tech Zone
- Country/Region : China
- Zip : 610041
Products List
Genuine laser control board MPC03-LH or LV
* for laser engraving and cutting machine
* PC-based, PCI interface
* 3-axis motion control board
LaserCut software developed by Leetro Automation Co., Ltd. Can be applied to laser engraving and cutting system processing large-scale images based on MPC03-LHMain features of...
2-phase Hybrid Stepper/stepping Motor (DM56xxE)
* flange size: 56x56mm;
* higher holding torque, 0.55 - 1.89Nm.
ItemSpecificationsStep Angle1.8°Step Angle Accuracy±5% (full step, no load)Resistance Accuracy±10%Inductance Accuracy±20%Temperature Rise80C Max. (rated current, 2 phase on)Ambient...
DMDT68A, 3-phase Hybrid Stepper Motor Drive
* PWM Constant wave chopper
* Up to 400KHz Pulse response frequency
* TTL compatible input signal
* Max current 6.8A/phase.
Features:- PWM Constant wave chopper- Up to 400KHz Pulse response frequency- TTL compatible input signal- 16-level currents, Max current 6.8A/phase-...
CO2 Glass Laser Tube Power Supply
This power supply is for 80/60W CO2 glass laser tube exclusively.
* IntroductionThis power supply is exclusively designed for CO2 laser machine. The output current can be set by user within the max one.* Specifications: WorkingEnvironment ConditionTemperature-10 ~ +40...
laser machine part control board MPC6535
* 3-axis controll with pulse frequency up to 7.5MHz;
* USB and RS232 interfaces;
* Uncapping protection;
* Flying-optics.
* Stand-Alone* Pulse frequency up to 7.5MHz* 3-axis card for stepper motors or digital servo motors* RS232 applicable for mainstream industrial touchscreen...
3-phase Hybrid Stepping/stepper Motor Drive/driver (DMDT68A)
* PWM Constant wave chopper
* Up to 400KHz Pulse response frequency
* TTL compatible input signal
* Max current 6.8A/phase
Features- PWM Constant wave chopper- Up to 400KHz Pulse response frequency- TTL compatible input signal- 16-level currents, Max current 6.8A/phase-...
1.2 three-phase Hybrid Stepper Motor (DM313xx)
* flange size: 132x132mm;
* higher holding torque, 20 - 35Nm.
ItemSpecificationsStep Angle1.2°Step Angle Accuracy±5% (full step, no load)Resistance Accuracy±10%Inductance Accuracy±20%Temperature Rise80C Max. (rated current, 2 phase on)Ambient...
DM60xxE, 2-phase Hybrid Stepper Motor
* flange size: 60x60mm;
* higher holding torque, 1.1 - 3.1Nm.
ItemSpecifications.Step Angle1.8°Step Angle Accuracy±5% (full step, no load)Resistance Accuracy±10%Inductance Accuracy±20%Temperature Rise80C Max. (rated current, 2 phase on)Ambient...
2-phase Hybrid Stepper/stepper Motor Driver/drive (DMD403A)
* 2-phase
* Supply voltage to +40VDC, current to 3.5A
* Microstep resolutions up to 51200 steps/rev
* for 4/6/8 leads motor
High performance, low costSupply voltage to +40VDC, current to 3.5AInaudible 20khz chopping frequencyTTL compatible and optically isolated input...
MPC6536, Dispensing Robot Controller
for open-loop motion control system in which the dispensing robot, dripping (micro-injection) and soldering motion control
MPC6536 is designed for the open-loop motion control system in which the dispensing robot, dripping (micro-injection) and soldering. Based on DSP and...