100W Single Output Switching Power Supply (NES-100-24)

* Protections: Short circuit/Over load/Over voltage; * Cooling by free air convection; * LED indicator for power on/off.

Output SETUP, RISE TIME  500ms, 20ms/230VAC          500ms, 20ms/115VAC at full load

Output HOLD TIME (Typ.)  30ms/230VAC          25ms/115VAC at full load

Input VOLTAGE RANGE 85 ~ 132VAC / 176 ~ 264VAC selected by switch           248 ~ 373VDC

Notes:

1. All parameters not specially mentioned are measured at 230VAC input, rated load and 25  of

    ambient temperature

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated

    with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. Line regulation is measured from low line to high line at rated load.

5. Load regulation is measured from 0% to 100% rated load.

6. The power supply is considered a component which will be installed into a final equipment. The

    final equipment must be re-confirmed that it still meets EMC directives

100W Single Output Switching Power Supply (NES-100-24)