CO2 Glass Laser Tube Power Supply

This power supply is for 80/60W CO2 glass laser tube exclusively.

* Introduction

This power supply is exclusively designed for CO2 laser machine. The output current can be set by user within the max one.

* Specifications:

Working Environment Condition	Temperature	-10 ~ +40 °C
	Moisture	≤85%
Output	Voltage	Max DC35KV
	Current	DC (0~28) mA
Input	L, N and PE Wires, 50Hz 220V±10%
Accuracy	2%
Efficiency	95%
Protected Current	28±1mA
Response Time	0.2 ms
Switch	O and 1, TTL
Power Adjustment	0~5V analog or PWM signal
Size	245×185×100 mm
Weight	Net 3.1 Kg, Gross 3.5Kg

* Wirings

-         Connect the RED wire to the laser tube positive end

-         Connect the BLACK wire to the laser tube negative end

-         Details refer to the Port Definition diagrams

* Caution

-        Keep minimum 100 mm clear space out of the cooling fan!

-        Be careful with GND connection for the laser machine!

-        Must connect the RED wire to the laser tube positive end before power on!

-        Must connect the Neutral wire. Three-end plug should be applied with FG≤10Ω

* The Port Definitions

Port	Definition		Port	Definition
5V	Internal +5V		H	Active-high
IN	Power Control, 0~5V analog or PWM		AC/L	Live Wire
G	Working Ground		AC/N	Working Neutral wire
P	Water Protection Switch		FG	Grounding for Safety
L	Active-low

CO2 Glass Laser Tube Power Supply